Note. Each of the 2 leg sets has a number that corresponds with the same number on the corner blocks. Find the leg section that is designed for each corner block.

Step1.

Place table face down and fit legs in the corner sockets with bolt holes pointing toward center of table.

Step 2.

Place a bolt in the hole in each corner support block.

Step 3.

Using the key supplied, tighten bolt into the table by turning the key in a clockwise motion

Step 4.

After bolt is securely tightened, perform steps 1 to 3 on the remaining preassembled leg section.

Step 5.

After all legs have been securely fitted and tightened, gently flip table over and enjoy!